Stapleless Stapler Harinacs Compact Alpha 5 Sheets White
New
Low in Stock
Out of Stock
This product is not available in your market
SLN-MSH305W
SKU#SLN-MSH305W
Innovative new way to staple, no more refilling needed. Safe, Economical , Convenient and Environment-friendly alternative to conventional staplers.
Folding the paper without using the needle. The paper can be closed without using the needle, so there is no need to replenish the needle. In addition, there is no need to separate the stapled paper when discarding it, and there is no need to worry about the needle getting into other things.
Compact body stuck to ease of use. Adhesive hole which is hard to come off.
The position of the binding hole can be known, so you can close the paper while checking the position of the binding hole. It can be bound at both corners and sideways, so it can be bound at any point. There is also a convenient mark on the corner binding. Binding hole position confirmation window is openable, so you can easily remove paper waste and paper dust when binding errors.
With a strap hole / Comes with a hole for a convenient strap when carrying.
* Does not have the same holding power as a stapler that uses a needle. * The number of sheets displayed is the value when using copy paper (PPC paper 64g / ㎡). * Holes are created when binding paper. * Depending on the type of paper, the number of stapled sheets may be reduced or not stapled. Note that the holding power may be weak. (Thin paper and soft paper such as thermal paper and copy slips) * It cannot be used for non-film materials or other materials with adhesive. * Be sure to try using unnecessary paper before use. * Do not fold the edge of the paper or the same spot twice. * Do not use if the binding position confirmation window is not completely closed or removed.
Compact body stuck to ease of use. Adhesive hole which is hard to come off.
The position of the binding hole can be known, so you can close the paper while checking the position of the binding hole. It can be bound at both corners and sideways, so it can be bound at any point. There is also a convenient mark on the corner binding. Binding hole position confirmation window is openable, so you can easily remove paper waste and paper dust when binding errors.
With a strap hole / Comes with a hole for a convenient strap when carrying.
* Does not have the same holding power as a stapler that uses a needle. * The number of sheets displayed is the value when using copy paper (PPC paper 64g / ㎡). * Holes are created when binding paper. * Depending on the type of paper, the number of stapled sheets may be reduced or not stapled. Note that the holding power may be weak. (Thin paper and soft paper such as thermal paper and copy slips) * It cannot be used for non-film materials or other materials with adhesive. * Be sure to try using unnecessary paper before use. * Do not fold the edge of the paper or the same spot twice. * Do not use if the binding position confirmation window is not completely closed or removed.
SPEC：
● Outer dimensions W ・ D ・ H / 27 ・ 87 ・ 53(mm) / 1.1 ・ 3.4 ・ 2.1(in)
● Recycled material mixing ratio / Main body / Lever: R-PC50%
● Material / Main body / Lever: R-PC, binding hole position confirmation window: PC, Lever Reinforcement: steel, blade: stainless steel
● Binding number / copy paper (PPC paper) approx. 5 sheets
● Binding hole size / 5 × 6.5mm
● Body color/ B・・・Blue、DB・・・Dark navy、G・・・Green、P・・・Pink、W・・・White
※This product does not offer the same strength as conventional needle staplers. ※The indicated number of papers applies to copy paper (64/㎡ PPC paper). ※Holes will be punched when papers are stapled together. ※Number of papers may vary depending on paper type. Certain types of paper may not be stapled properly. Staple strength may weaken depending on usage (Thin and/or soft paper, such as thermal paper or carbon copy paper). ※Cannot be used with film-type non-paper material or paper with adhesive. ※Always test use with scrap paper before use. ※Do not use the edge of paper or the same surface twice, as it will affect firmness. ※Do not use when the stapled section is not fastened firmly or when the paper is fastened loosely.
Country of Origin： CHINA
● Outer dimensions W ・ D ・ H / 27 ・ 87 ・ 53(mm) / 1.1 ・ 3.4 ・ 2.1(in)
● Recycled material mixing ratio / Main body / Lever: R-PC50%
● Material / Main body / Lever: R-PC, binding hole position confirmation window: PC, Lever Reinforcement: steel, blade: stainless steel
● Binding number / copy paper (PPC paper) approx. 5 sheets
● Binding hole size / 5 × 6.5mm
● Body color/ B・・・Blue、DB・・・Dark navy、G・・・Green、P・・・Pink、W・・・White
※This product does not offer the same strength as conventional needle staplers. ※The indicated number of papers applies to copy paper (64/㎡ PPC paper). ※Holes will be punched when papers are stapled together. ※Number of papers may vary depending on paper type. Certain types of paper may not be stapled properly. Staple strength may weaken depending on usage (Thin and/or soft paper, such as thermal paper or carbon copy paper). ※Cannot be used with film-type non-paper material or paper with adhesive. ※Always test use with scrap paper before use. ※Do not use the edge of paper or the same surface twice, as it will affect firmness. ※Do not use when the stapled section is not fastened firmly or when the paper is fastened loosely.
Country of Origin： CHINA
Folding the paper without using the needle. The paper can be closed without using the needle, so there is no need to replenish the needle. In addition, there is no need to separate the stapled paper when discarding it, and there is no need to worry about the needle getting into other things.
Compact body stuck to ease of use. Adhesive hole which is hard to come off.
The position of the binding hole can be known, so you can close the paper while checking the position of the binding hole. It can be bound at both corners and sideways, so it can be bound at any point. There is also a convenient mark on the corner binding. Binding hole position confirmation window is openable, so you can easily remove paper waste and paper dust when binding errors.
With a strap hole / Comes with a hole for a convenient strap when carrying.
* Does not have the same holding power as a stapler that uses a needle. * The number of sheets displayed is the value when using copy paper (PPC paper 64g / ㎡). * Holes are created when binding paper. * Depending on the type of paper, the number of stapled sheets may be reduced or not stapled. Note that the holding power may be weak. (Thin paper and soft paper such as thermal paper and copy slips) * It cannot be used for non-film materials or other materials with adhesive. * Be sure to try using unnecessary paper before use. * Do not fold the edge of the paper or the same spot twice. * Do not use if the binding position confirmation window is not completely closed or removed.
Compact body stuck to ease of use. Adhesive hole which is hard to come off.
The position of the binding hole can be known, so you can close the paper while checking the position of the binding hole. It can be bound at both corners and sideways, so it can be bound at any point. There is also a convenient mark on the corner binding. Binding hole position confirmation window is openable, so you can easily remove paper waste and paper dust when binding errors.
With a strap hole / Comes with a hole for a convenient strap when carrying.
* Does not have the same holding power as a stapler that uses a needle. * The number of sheets displayed is the value when using copy paper (PPC paper 64g / ㎡). * Holes are created when binding paper. * Depending on the type of paper, the number of stapled sheets may be reduced or not stapled. Note that the holding power may be weak. (Thin paper and soft paper such as thermal paper and copy slips) * It cannot be used for non-film materials or other materials with adhesive. * Be sure to try using unnecessary paper before use. * Do not fold the edge of the paper or the same spot twice. * Do not use if the binding position confirmation window is not completely closed or removed.
SPEC：
● Outer dimensions W ・ D ・ H / 27 ・ 87 ・ 53(mm) / 1.1 ・ 3.4 ・ 2.1(in)
● Recycled material mixing ratio / Main body / Lever: R-PC50%
● Material / Main body / Lever: R-PC, binding hole position confirmation window: PC, Lever Reinforcement: steel, blade: stainless steel
● Binding number / copy paper (PPC paper) approx. 5 sheets
● Binding hole size / 5 × 6.5mm
● Body color/ B・・・Blue、DB・・・Dark navy、G・・・Green、P・・・Pink、W・・・White
※This product does not offer the same strength as conventional needle staplers. ※The indicated number of papers applies to copy paper (64/㎡ PPC paper). ※Holes will be punched when papers are stapled together. ※Number of papers may vary depending on paper type. Certain types of paper may not be stapled properly. Staple strength may weaken depending on usage (Thin and/or soft paper, such as thermal paper or carbon copy paper). ※Cannot be used with film-type non-paper material or paper with adhesive. ※Always test use with scrap paper before use. ※Do not use the edge of paper or the same surface twice, as it will affect firmness. ※Do not use when the stapled section is not fastened firmly or when the paper is fastened loosely.
Country of Origin： CHINA
● Outer dimensions W ・ D ・ H / 27 ・ 87 ・ 53(mm) / 1.1 ・ 3.4 ・ 2.1(in)
● Recycled material mixing ratio / Main body / Lever: R-PC50%
● Material / Main body / Lever: R-PC, binding hole position confirmation window: PC, Lever Reinforcement: steel, blade: stainless steel
● Binding number / copy paper (PPC paper) approx. 5 sheets
● Binding hole size / 5 × 6.5mm
● Body color/ B・・・Blue、DB・・・Dark navy、G・・・Green、P・・・Pink、W・・・White
※This product does not offer the same strength as conventional needle staplers. ※The indicated number of papers applies to copy paper (64/㎡ PPC paper). ※Holes will be punched when papers are stapled together. ※Number of papers may vary depending on paper type. Certain types of paper may not be stapled properly. Staple strength may weaken depending on usage (Thin and/or soft paper, such as thermal paper or carbon copy paper). ※Cannot be used with film-type non-paper material or paper with adhesive. ※Always test use with scrap paper before use. ※Do not use the edge of paper or the same surface twice, as it will affect firmness. ※Do not use when the stapled section is not fastened firmly or when the paper is fastened loosely.
Country of Origin： CHINA